How To Remove Paint From Plastic Models: 60 Facts

This time, we’re going to talk about How To Clean Paint Off Plastic Models. There is a lot of information about how to remove paint from plastic models on the internet, of course. Social media are getting better and better quickly, which makes it easier for us to learn new things.

Acetone for Stripping Minis and Remove Acrylic Paint From Models are also linked to information about how to remove paint from plastic miniatures. As for other things that need to be looked up, they are about How To Remove Citadel Paint From Plastic Models and have something to do with Removing Enamel Paint From Plastic Models.

60 Facts How To Clean Paint Off Plastic Models | Strip Paint Off Resin Miniatures

• The use is very easy: Apply undiluted Paint Remover to the area to be treated using a paint brush or cotton swab. The paint begins to peel off after several minutes. Remove loose paint with a paint brush. - Source: Internet
• Note that many models may still have primer or hard to reach gunk on a model if there is lots of detail work and/or the primer used is very resilient. You can repeat the steps above for a second stab at the model’s cleaning, but good is good enough if the paint is scrubbed down to it’s almost bare minimum and priming over it will hide the prior paint job. The hobby knife is your friend if you prefer precision detail as the sharp end can help scour away flecks and bits of primer and paint that the thicker bristle brushes cannot reach. - Source: Internet
• You can often get away with using a 70% isopropyl alcohol or acetone on some card or a cotton bud though. In some cases, we would actually recommend that you try to water down the isopropyl or acetone prior to using it though. This will make the paint removal process slower but reduce the chances of damaging your plastic models. - Source: Internet
• If you are looking for a product specialized product for removing paint, then you do not need to look any further than this fantastic product. The water-based formula allows you to safely and easily remove all kinds of paint from a range of surfaces, including metal, plastic, concrete, fiberglass, and more. This product is eco-friendly and safe for the user. - Source: Internet
• Another note- vehicle stripping is by far the hardest. The best you can do is strip off any excess paint, sand down with fine sandpaper, and clean off surface while applying a new coat of primer. This tutorial will focus more on infantry and monster models than vehicles. - Source: Internet
• If your models are resin, alway wear protective headgear. Similarly, any paint chips created should be cleaned up. Health hazards abound if you leave any paint chips behind or fail to wear protective masks when working with resin. - Source: Internet
• Next, take the plastic bristle brush and apply more force than the prior brush. Scrub in various motions back and forth as if you are brushing your teeth. Circles, back in forth. Try different directions, turning the model around so that you can reach different areas. Worst case scenario, you have to remove the model’s arms, legs, or base to reach areas the brush is too big to get to. - Source: Internet
• Paper towel drying can remove the thin film of paint and simple green on the model. You can also run the model under a faucet and clean it. afterwards with paper towels. - Source: Internet
• Pine-Sol, as the name suggests, uses pine oil as the active ingredient. This stuff attacks paint aggressively. In fact, if you strip miniatures attached to a plastic base, such as Games Workshop’s “slottabases,” remove them before cleaning with Pine-Sol. The bases can actually go soft on you. - Source: Internet
• That brings our article going over how to remove paint from plastic to an end. We have covered a number of different methods that you are able to use to quickly and easily remove paint from plastic without damaging the plastic. The trick is to workout the specific type of paint that you have on your plastic that needs to be removed and then work on removing it correctly. This not only helps to remove the paint from the plastic quicker but it can also reduce the chances of you accidentally damaging your plastic surface with the cleaning chemicals too. - Source: Internet
• Thinners as a paint stripper for plastic may not be the best method. Thinners might not damage some harder plastics, but they will definitely harm softer plastics and dissolve Styrofoam. Trying something less harsh first would be a better idea. - Source: Internet
• Set your mini in the liquid then start brushing. The paint comes off fairly easily, even with loose brushing. Get more liquid on your brush and continue to brush over the miniature until the layers of paint fall away. You can work it as hard or soft as you want, but be careful to keep it off your skin and out of your eyes! - Source: Internet
• Plastic models and painting them is a popular hobby and at some point, a paint stripper for plastic will be necessary. Maybe a mistake was made, or you could simply want to apply a fresh coat of paint, either way, the old paint needs to be removed. Plastic models can either be painted with enamel or acrylic paints and these can be removed by using a commercial paint remover you get at a model store. You could also try out other products like Easy Off, Simple Green, Purple Power cleaner, or SuperClean. - Source: Internet
• Another household item that can be used to remove paint from plastic is oven cleaner. You can spray the model and place it into a sealed bag. Leave this for a day or two and remove it, use a brush to clean the item, and rinse it off with water. - Source: Internet
• Another method for how to remove spray paint from plastic with household items is vegetable oil. Everybody has this in their homes, and it is safe and easy to use for removing paint from plastic. Place a clean cloth into the vegetable oil and rub where the paint has spilled. Here you can apply with a lot more energy until you can see the paint coming off. - Source: Internet
• Testors ELO is a paint and decal remover that easily lifts off paint and decals. The product comes in multiple sizes and works amazingly well and has been safe for use on metals and plastics. Take a look at how easy it is, and be sure to watch the full tutorial video below! - Source: Internet
• The majority of paints can be removed from most types of plastic using either paint remover, isopropyl alcohol, or acetone with ease. The issue is that some paints responds better to some products and some plastics may have reactions to others. Unfortunately, there is no one size fits all approach when it comes to removing paint from plastic due to there being so many types of paint and plastic. - Source: Internet
• When you finally get to stripping, take out only a few models at a time. Place models on newsprint. Keep paper towels handy. If Simple Green dries off the models, it may become harder for you to strip the paint. So do it while it is wet. - Source: Internet
• Any plastic model or item that soaks in the Dettol will loosen any glue there is. However, this is a good thing if you want to adjust any mistakes. You should just be aware that the glue will break down. - Source: Internet
• In this tutorial, I will share a secret with you. You can go on any hobby forum and guaranteed you’ll see the question “How do you strip paint from models?”. Well, look no further, once you’ve tried the Garfy method you’ll be amazed at how fast and simple it is. Read on to discover how. - Source: Internet
• Alternatively, you can rinse the models while stripping them with brushes. Rinsing the models in the sink may dislodge very loose paint particles (acting as a light brush), and help to remove the grime from paint left over from the brushes as the brushes get dirty. Of course, dry the models after rinsing. - Source: Internet
• I also had some Tau models that I had painted about 4 years ago and wanted to paint them again. I couldn’t just paint over the old paint because when I had first painted the models, I used way too much paint. Guess what? The first coat of paint had filled all the cracks in the model and obscured most of the detail. - Source: Internet
• As you can see, plastic is quite a broad term as there are many different types of plastics available today. The type of plastic can also play a role in removing paint from plastic as some are harder and more durable than others. So, what are the possible cases where removing paint from plastic is necessary? - Source: Internet
• Before removing old paint, make sure it contains no lead. Did you hear that it causes irreversible damage to the brain, liver, and kidney? With this kit, you can take 5 samples, send them into the EPA approved lab and the cost of the lab is included in the purchase. I’ve looked at other kits that have hidden fees. - Source: Internet
• Once dry, take the kitchen brush and stiffly but not strongly brush the models the clear away any remnants of paint left on the model. Clean up afterwards. Depending on frugality, you can empty some of the Simple Green back in a contain to reuse later. The bits of flecking on bases, paint chips and such should be disposed of in a proper manner. - Source: Internet
• While Simple Green helps, I found that putting models in the freezer really helps with taking apart models made of metal. The glue becomes brittle, and the model easily comes apart. I also tried this with plastic models, but I’m not sure if the weakened glue was from the simple green or the freezer. - Source: Internet
• One of the best options to remove spray paint from house hold plastics is normal mustard but it can sometimes have a side effect on some types of plastic. Simply apply a thin layer of the mustard to the area of the plastic that has the paint that needs removing and leave it overnight. Sometimes the paint will then wipe right off the next day but others the bonds of the paint will be weak enough for you to use a paint remover on the paint to lift it off much quicker than out your have been able to otherwise. - Source: Internet
• When using a paint stripper for plastic, you have to be careful what you use. Harsher chemicals like paint thinners can melt the plastic. First, try using simple soap and water, then try some vegetable oil. If the paint is dry, you can also try scraping it off and if that does not work, try a little acetone or rubbing alcohol. - Source: Internet
• You can also use ammonia, which works more on acrylic and latex paints. Mineral spirits will work better on oil-based paints. Solvents should always be tested out first in an unobtrusive area. The different plastic will react differently, so take a Q-tip and place a drop on the plastic surface, and wait to see what happens. If you do not notice any difference, it should be okay to use the solvents. - Source: Internet
• There is always a chance of spilling a little paint when working around the house. Maybe you have done the best you can to cover areas, but you still somehow manage to find paint splatter on surfaces when you are finished. Removing paint from metal and most other surfaces is easy; you simply wipe it off with a solvent. Removing paint from plastic, on the other hand, can be a little more difficult as solvents can damage the surface. Thankfully, when it comes to how to remove paint from plastic, there are a few safer methods. - Source: Internet
• You might need something stronger than vegetable oil when it comes to how to remove enamel paint from plastic, which is where acetone comes in. You can use nail polish, however, if the plastic is colored, a regular acetone-based product will work better. Apply directly to the paint, wait five minutes, and then wipe off with a cloth. - Source: Internet
• I use Super Clean, too. I first tired it a couple of years ago, to remove the chrome from a sprue of chromed parts. It took it off in under 2 minutes. I find that it will soften paint in about 5 to 10 minutes, at which time I can gently scrub the paint off with an old toothbrush. I do find, though, that if I soak parts longer, the paint will lift off and dissolve into the liquid. - Source: Internet
• Although there are natural, solvent free methods that can work sometimes, they heavily depend on the type of paint that you need to remove from your plastic. They tend to only really work with entry level, water based paints before their efficiency starts to drop off drastically. With oil based paints or intermediate or professional grade water based paints, these solvent free methods usually do little to nothing. - Source: Internet
• It is not nearly as caustic as oven cleaner, whose principal ingredient is lye, as noted in the earlier post. Also, you can use a batch of SC over and over, whereas oven cleaner is a one-shot product. I keep a couple of glass jars of various sizes, filled with SC, for parts of various sizes. - Source: Internet
• This is why we recommend that our readers try to use a 70% isopropyl alcohol to remove their oil paints from plastic if possible. They are much more forgiving on the actual plastic surface but do take a little more scrubbing to actually remove the oil paint from the plastic. Simply adding a small amount of the 70% isopropyl alcohol to a cloth or cotton but should be enough to get the job done most of the time. - Source: Internet
• 1. Is it still wet? Keep it wet! Apply the paint’s known solvent right away if you can. Not sure about the solvent? Start with paint thinner (mineral spirits). Lighter fluid and gasoline will work too. - Source: Internet
• This is why we have broken our article down into sections to offer our readers the best possible advice and recommendations possible. You are able to quickly and easily navigate to each of the sections using the table of contents below allowing you to get specific methods for removing specific types of paint from your plastic. Using the recommended methods for the specific type of paint not only increases the chance that your paint will come off the plastic but also that the plastic will be unharmed in the process too. - Source: Internet
• Start by using one of the metal bristle brushes. Stainless steel is best, but abraisive. If you rub hard enough, a stainless steel bristle brush can leave marks on large, smooth surfaces. It’s best to use for aggressive cleaning of a model with fine details and bits of stubborn paint in little crevaces the bristles can reach. - Source: Internet
• NON-Acetone nail varnish remover works great on plastics. The best method I have found for plastics! Again, dip for about 20 minutes. and scrubs very lightly, and it should peel off. repeat if paint is caked on. and a lot less messier and a lot quicker than dettol… - Source: Internet
• The best method would be to get rid of the paint straight away. However, you can also lightly sand the surface to get rid of the paint. Do not overdo this method as you can leave marks, sanding will also dull the surface. - Source: Internet
• I ruined a collector’s item once because I guessed at how to remove paint from plastic: it turned a G.I. Joe bald. I hope this all helps. - Source: Internet
• Latex will become gooey when exposed to certain solvents.* Acetone is the best way to tell if dried paint is latex (most nail polish removers have acetone), but rubbing alcohol will also dissolve latex, just more slowly. Video of me doing this test is at the very bottom. - Source: Internet
• There are other options available as well, and these methods use materials that might be lying around the house. One cheap and easy method is to use Dettol or some other antiseptic product. This will work best on acrylic paints. Follow the process below for removing paint from plastic models. - Source: Internet
• Note on stripping and bits- model parts will fall off. Rarely, something will snap off rather than at a glued joint. If it happens, continue to strip and set bits aside with models. Reglue when everything is dried and clean. - Source: Internet
• The go-to product (something we should all have around the house) is Motsenbocker’s for latex paint and for oil paints (both shown). Mr. Motsenbocker, is there anything you can’t do? How to know what paint you have it key. - Source: Internet
• Paint remover for plastic products may contain harmful ingredients that could affect the plastic surface. So, always read the label and make sure what you are buying is correct and follow the instructions for use. Even some of the household items can also cause damage to plastic surfaces. Nail polish remover, for instance, can melt plastic, so it is best not to use too much of it. Following are a few more tips, so you can remove paint from plastic carefully. - Source: Internet
• I have not used the more pleasant-smelling blue variety of Pine-Sol. My wife bought some the other day, hoping that it will work without stinking up the house. I’ll let you know what I find out. The normal stuff is a bit strong-smelling, so open a window or otherwise ventilate the area where you will clean the paint off your minis after soaking them in Pine-Sol. - Source: Internet
• Final word on timespans in Simple Green- I’ve found that the longer the model sits in Simple Green, the looser the paint gets. Any non-primer paint may dissolve utterly in the green soup after a long enough period, leaving just primer and tougher paints. But if your impatient, a day is all that is really needed. - Source: Internet
• With the brush, go over with moderate force over painted areas. This will not remove the majority of the paint for plastic. For metal, the paint will come right off in globs. For plastic models, what this does is help loosen the paint for the plastic bristle brush you will use next. - Source: Internet
• 2. Has it dried up? Let’s start with what we have around the house, then we’ll look at some solvents and paint removers (and stock up for next time). That old paint remover is now illegal for good reason. Read the Washington Post about new law from the EPA, or you can it on the EPA’s website. - Source: Internet
• Because of the abuse my brushes have gone through, they can no longer be used for precision work. The bristles bend and twist in different directions now. It’s good because they can now reach in different directions and help scrape off paint by coming in at a different angle even if I use the same stroking motions with my hand. - Source: Internet
• At home or work, if you look around, you are bound to find numerous plastic items and products. Plastic has become an extremely common material that comes in different forms. There are several primary forms of plastic as follows: - Source: Internet
• Many times the plastic model in your project may not have come out correct or you just want to update the model. It is better to remove the existing paint and redo it from scratch. This can be done using mineral spirits instead of other solvents. - Source: Internet
• I needed about 750ml of cleaner to cover half of my tank because I could flip it and soak again. I used a ratio of water to cleaner of 2:1. The soak time estimates in this guide are using this mixture. (Tip: Soak the models in a tub or bowl that you don’t care about.) - Source: Internet
• If you only need to clean up a small amount of spilled paint and you do not want to buy a whole new product, this all-in-one domestic cleaner is a great option. Once you have removed the spilled paint, you can use these cleaning pads to clean up any other sources of dirt in your home. This product is perfect for cleaning doors, bathtubs, oven doors, and even light switches. There are no harsh chemicals in this product, and you can either re-fill the product once it runs out or recycle the bottle. - Source: Internet
• There are some situations where you will have to use a 90% isopropyl alcohol though due to the pigment used in some oil based paints being considerably stronger than others. This tends to be the reds and browns and although a 70% isopropyl alcohol is able to get the job done, it really does take a ton of time and effort where a 90% solution would get the job done in minutes. If you do use a 90% isopropyl alcohol to remove oil paint from plastic try to remember to wash the plastic down with water afterwards to prevent the alcohol from potentially damaging it over time. - Source: Internet
• We have seen a number of home remedy options for removing latex paint from plastic but the only one that really offers any benefit is the citrus juice based methods. Even then though, a normal paint remover will usually offer better performance of removing latex paint from plastic with an actual latex paint remover being the best option by far. Due to this, we usually recommend that our readers avoid using the various home remedies that people recommend online with latex paint as they tend to just be a waste of time with some potentially making the situations worse. - Source: Internet
• Another easy method to help you strip paint from plastic is by gently scraping it off using a paint scraper. This method works best on smooth plastic, but whatever the case, be careful to not be too aggressive or you could damage the surface. Instead of a paint scraper, you could also try a blade, screwdriver, or putty knife. Make sure the scraper is at an angle to scrape the paint. - Source: Internet
• This product works the first time every time to remove a variety of tough stains like paint on plastic. If you have tried many products and they have not worked, then you definitely need to try this product. You can safely use this paint stripper for plastic, clothing, glass, and a variety of other surfaces. This paint remover for plastic is easy to use, simply apply it to the stain and leave it to penetrate for at least a minute. You can then use an absorbent cloth to wipe it off. - Source: Internet
• If you are not satisfied with the paint job you’ve done on an older miniature, all is not lost. Pick up a large bottle of Pine-Sol brand cleaner, the golden-colored variety works great. I would recommend against using an off-brand or generic cleaner, which may not strip paint as effectively. - Source: Internet

Here are a few tips to help you find information about Warhammer Paint Stripping:

• Look for good places to get information about how to remove citadel paint from plastic models. This can be done in libraries, on websites, or even by paid journalists.
• When looking for information about Paint Remover, it’s important to know that there are different kinds of online sources, like Google and YouTube. Social media sites like Facebook and Twitter are also good places to look for information about How to Strip With Simple Green: WarOne Style!.

Video | How To Clean Paint Off Plastic Models

To get the best information about how to remove citadel paint from plastic models, you should read to find out how true each source is.

This article has a few videos from different places about Strip Paint Off Miniatures in Less Than a Minute! that will help you learn more about it. The Internet is a great place to find out about a wide range of things.

## Here are some crucial aspects concerning how to strip acrylic paint from plastic models:

• How To Clean Paint Off Plastic Models
• How To Remove Paint From Plastic Models
• How To Strip Paint From Plastic Models
• How To Strip Paint Off Plastic Miniatures
• How To Strip Paint Off Plastic Warhammer Models

With so many websites and forums that talk about Biostrip 20 Paint Remover, it shouldn’t be hard to find what you need.

Most people are used to getting information about Stripping Miniatures With Nail Polish Remover in a very different way than this. It lets you look at the information about Remove Paint From Resin Models and how it can be used in more detail. ways to put information about Best Paint Remover For Plastic Models in a way that looks good and is useful. They can be used in business and marketing, and they can also be used to talk about how to remove citadel paint from plastic models. So, we also give you some pictures about 3 Steps To Remove Paint From Plastic Models.

In the end, this article gives a summary of Biostrip 20 Paint Remover. Also talked about are Removing paint from plastic model kits. and Warhammer Remove Paint, which you can use to compare how much you know about Remove Paint From Plastic.